- 1 How to connect speakers to PC without an amplifier?
- 2 What are the different types of speakers?
- 3 What are Active and Passive Speakers?
If you have been searching for a speaker lately, then, you have come to the correct place as we are going to discuss how to connect speakers to PC without amplifier. Basically, according to the latest trends, people are choosing their speakers with various factors in mind, such as the overall power, quality of the sound, portability, personality as well as various other factors which determine the overall durability and functionality of a speaker. Although you might get excited while looking out for a speaker, yet, it is highly advised that you refer to an expert and go through all the functionalities and features of a particular speaker before deciding to buy it.
Most of the times, it has been seen that is people often overlook the features section of a speaker and go for a music system which looks beautiful. But, it is not a good symptom as a say
o not judge a book by its cover”. Hence, keeping this in mind, it is highly advised that people should inspect and enquire about each and every feature of the speaker and decide on a music system which suits their needs and demands perfectly.
There are various factors which determine whether a speaker is best ut suited for you. Some of the common features which you should look for while buying a speaker include the frequency response, sensitivity, overall impedance as well as the power of the speaker.
So, before going into the methods of connecting speakers to a PC without an amplifier, les discuss some of the different types of speakers which are available in the market nowadays.
How to connect speakers to PC without an amplifier?
In order to know to connect speakers to a PC without amplifier, we will need to learn about the process of connecting a passive speaker to a personal computer. Basically, the passive speakers are only functional when they are connected with a device which contains an inbuilt amplifier since the passive speakers do not have one. Hence, as the computers are known to have an inbuilt amplifier, the passive speakers are connected to such computers and desktops, so that they can produce the required amount of sound.
So, in order to do so, we will have to follow the underlying steps:
Step 1: Identify the Position
Firstly, we will have to position and place all our equipment in their proper positions with respect to the PC.
Step 2: Implement Power
Now, you will need to connect the power cables of the speakers to a designated power socket. However, one thing which you should be cautious of is that during this entire process, you will need to ensure that your PC is turned off, or you may damage the computer if there are compatibility problems.
Step 3: Connect your Speaker
Search for the 3, mm jack at the rear side of your computer and connect the relevant jack to your speaker’s head. Be careful of not pushing the jack too hard or the ports will get damaged.
Step 4: Adjust the Volume
Now, once the device is connected and there are no humming or buzzing noises, go to the Control Panel on your PC and adjust the volume settings from “Audio Settings”.
What are the different types of speakers?
Generally, most of the speakers which are available in the market today are categorised on the basis of the sound drivers which they incorporate. Basically, this is a completely technical issue and the type of driver which is installed on a speaker is the primary categorisation basis of any kind of music system. So, following are some of the most important types of speakers which are available in the market:
This one is the most widely recognized sorts, and they are normally latent speakers. They can have at least one woofer drivers. They are likewise known to deliver low-recurrence sound and have at least one tweeter drivers. At times, the expert speakers may have back drivers to enhance delivered sound.
This sort has an enormous woofer driver, and frequently the walled-in area incorporates a bass port to create low-recurrence sound. They can likewise be utilized to improve base from other going with speakers without essentially trading off nature of sound.
These have various likenesses with dynamic speakers, including how the drivers are orchestrated in a wave direct structure. It is with horn speakers that clients can appreciate benefits that accompany a generally high level of affectability and transmission of sound in huge zones.
Electrostatic speakers can be an incredible decision for anybody searching for fresh and point by point sound. These stomach speakers highlight one drive and a fine film which is set more than two conductive boards. They do accompany an outside power source and are constantly connected an outside electrical plug. Much of the time, electrostatic speakers are utilized for high frequencies and are not perfect when you are searching for low-recurrence speaker types.
Rather than the stomachs, planar-attractive speakers include a slight metal lace, and not at all like electrostatic you needn’t bother with an outside power source to work. These are the sort of speakers that can likewise offer high utility esteem and keep going for quite a while in the event that they are taken great consideration of.
What are Active and Passive Speakers?
In sound frameworks, a speaker’s essential capacity is to create a discernible sound output. The two sorts of speakers dependent on the grounds of amplification are active and passive speakers. Most speakers these days are of the passive type. You need an independent amp or subwoofer to set up a passive speaker framework. Let us learn a little more about these active and passive speakers:
The active speakers are the type of speakers which contain and inbuilt amplifier which connects directly to the source of your sound input. One special thing about these active speakers is that they can be easily connected to various types of audio sources, apart from the usual ones which include computers, mixtures and other instruments.
Passive speakers are the type of speakers which, in contrary to the active speakers, require an additional amplifier to create the sound. Basically, these passive speakers require various cables and other types of secondary speakers to produce crossovers in their setup.
Hi music fan! I am Jeff. Hope that you enjoy some stuff I shared here in my personal blog.
About myself, Currently I am in charging as Artist Manager/Music Supervisor at 72 Music Management. I did managed album to Grammy Award in 2017 with 7 Nominations from 2014-2020 and had the opportunities to work with : A.J. Croce, Blind Boys of Alabama, Bobby Rush, Dom Flemons, Dustbowl Revival, Sarah Grace
Governor of the Memphis Chapter of The Recording Academy is one of a award that I am lucky to achieved.